Motor Clean (Engine Clean)

DESCRIPTION Engine Clean is a specially formulated combination of additives and carrier fluid. In combination with the carrier fluid, the highly effective detergent and dispersant additives dissolve sludge and lacquer formers. All types of oil soluble and oil insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and is filled with fresh oil which is not contaminated with old impurities can develop its full performance characteristics.-

PROPERTIES

- gentle and rapid cleaning
- neutral to seals and other materials installed in the engine
- compatible with catalytic converters
- highly economical
- no additional environmental pollution
- simple to use

TECHNICAL DATA

Basis: additive/carrier liquid
Colour: brown
Density at 20 °C: 0.82 g/cm3
Flash point: 60 °C
Pour point: -45 °C

APPLICATION Cleaning and flushing oil systems of petrol and diesel engines. Engine Clean application is dependent on the degree of contamination of the oil circuit. Not suitable for use on motorbikes with wet clutches.

APPLICATIONS One 500 ml can is sufficient for up to 5 litres of oil.Add Engine Clean to the engine oil at running temperature before changing the oil.After adding the product, allow the engine to idle for approx. 10 minutes. Then
change the oil and the filter.Engine Clean is compatible with all commercially available engine oils

AVAILABLE
PACK SIZES Engine Clean 500 ml Part no. 1019